Ricerca:
•
TEKTRONIX
•
TTi Thurlby Thandar
•
Goodwill GW Instek
•
Weinschel Associates
•
Electro-Metrics
•
Solar Electronics
Antennas
Application Information
Capacitors
Coupling Networks
Essential Appartus Charts
Instruments
Line Impedence Networks
Probes
Pulse Trasformers
Resistive Devices
Trasformers
Wave Filters
Solar Electronics
>
Antennas
7334
1 Loop Antenna
Euro 0,00
Quantità
The Solar Type 7334-1 Loop Antenna has been designed as a substitute for the AT-205/URM-6 antenna and is a replacement for Eaton Model 94607-1. It uses 36 turns of wire on a 5.25"
(13.3 cm) diameter form enclosed in an electrostatic shield as described in paragraph 5.2.1 of MIL-STD-461A.
Disponibilità:
7429
Loop Antenna, RS01
Euro 0,00
Quantità
The Type 7429-1 Loop Antenna
has been designed to the exact requirements of the specification.
The loop winding is placed on a durable plastic form and is equipped with banana jack style terminals for connection to the test setup. The
loop is not shielded.
Disponibilità:
9130-1
Loop Antenna
Euro 0,00
Quantità
DESCRIPTION
This antenna was designed as a replacement for Eaton 94608-1. It is similar to Stoddart 91117-2, 30-inch diameter loop, supplied with AN/URM-6B and NM-10A
EMI receivers. In addition to operating as a receiving antenna, the Type 9130-1 Loop Antenna is capable of carrying ten amperes in test setups for generating magnetic fields.
Disponibilità:
9229
Loop Sensor, RS101
Euro 0,00
Quantità
Test Method RS101 of MIL-STD-461D requires radiated magnetic fields over the frequency range 30 Hz to 100 KHz to determine the susceptibility or immunity of the equipment under
test (EUT). Two loop antennas are required for compliance with the requirements.The radiating loop is 12 cm in diameter and the sensing loop (used for calibration) is 4 cm in diameter. The Type 9230-1 Radiating Loop has been designed so that the Type 9229-1 Loop Sensor can be attached at the required 5 cm distance.
APPLICATION
Disponibilità:
9230-1 Loop Antenna, RS101
1 Loop Antenna, RS101
Euro 0,00
Quantità
Test Method RS101 of MIL-STD-461D requires radiated magnetic fields over the frequency range 30 Hz to 100 KHz to determine the susceptibility or immunity of the equipment under
test (EUT). Two loop antennas are required for compliance with the requirements.The radiating loop is 12 cm in diameter and the sensing loop (used for calibration) is 4 cm in diameter. The Type 9230-1 Radiating Loop has been designed so that the Type 9229-1 Loop Sensor can be attached at the required 5 cm distance.
Disponibilità:
Euro 0,00
Quantità
Disponibilità:
Selint s.r.l., Via della Stazione di Ciampino 24, 00040 Morena (Roma) Copyright 2008
Tel. 06.79841028 - 06.79841418 Fax 06.79845254 Email: info@selint.it P.Iva 10151060158
Services and Support
Powered by:
Web Marketing Pro
, P
osizionamento
&
Email Marketing
Selint:
